Dlubal Dev Docs

# Types for Concrete Design

Go to [source] (opens new window)

# ConcreteDurability

# ConcreteDurability(no, name, members_no, member_sets_no, surfaces_no, exposure_classes_reinforcement, exposure_classes_reinforcement_types, exposure_classes_concrete, exposure_classes_concrete_types, structural_class, stainless_steel_reduction, additional_protection_reduction, allowance_deviation, comment, params, model)

  • Parameters

    • no (int) – Concrete Durability Tag

    • name (str) – User Defined Name

    • members_no (str) – Assigned Members

    • member_sets_no (str) – Assigned Member Sets

    • surfaces_no (str) – Assigned Surfaces

    • exposure_classes_reinforcement (list) – Exposure Classes Reinforcement Parameters

    • exposure_classes_reinforcement_types (list of enum) – Exposure Classes Reinforcement Parameters

    • exposure_classes_concrete (list) – Exposure Classes Concrete Parameters

    • exposure_classes_concrete_types (list of enum) – Exposure Classes Concrete Parameters

    • structural_class (list) – Structural Class Parameters

    • stainless_steel_reduction (list) – Stainless Steel Reduction Parameters

    • additional_protection_reduction (list) – Additional Protection Reduction

    • allowance_deviation (list) – Allowance Deviation Parameters

    • comment (str, optional) – Comments

    • params (dict, optional) – Any WS Parameter relevant to the object and its value in form of a dictionary

    • model (RFEM Class, optional) – Model to be edited

# ConcreteEffectiveLength

# ConcreteEffectiveLength(no, name, members_no, member_sets_no, flexural_buckling_about_y, flexural_buckling_about_z, nodal_supports, factors, comment, params, model)

  • Parameters

    • no (int) – Concrete Effective Length Tag

    • name (str) – User Defined Name

    • members_no (str) – Assigned Members

    • member_sets_no (str) – Assigned Member Sets

    • flexural_buckling_about_y (list) – Flexural Buckling About Y Option

    • flexural_buckling_about_z (list) – Flexural Buckling About Z Option

    • nodal_supports (list of lists) – Nodal Support Table

      nodal_supports = [[support_type, support_in_z, support_spring_in_y, eccentricity_type, eccentricity_ez, restraint_spring_about_x, restraint_spring_about_z, restraint_spring_warping, support_in_y_type, restraint_about_x_type, restraint_about_z_type, restraint_warping_type, nodes], …]

    • factors (list of lists) – Factors Table

      factors = [[flexural_buckling_y, flexural_buckling_z]]

    • comment (str, optional) – Comments

    • params (dict, optional) – Any WS Parameter relevant to the object and its value in form of a dictionary

    • model (RFEM Class, optional) – Model to be edited

# ConcreteReinforcementDirections

# ConcreteReinforcementDirection(no, name, surfaces, reinforcement_direction_type, rotation_parameters, comment, params, model)

  • Parameters

    • no (int) – Concrete Reinforcement Direction Tag

    • name (str) – User Defined Name

    • surfaces (str) – Assigned Surfaces

    • reinforcement_direction_type (enum) – Reinforcement Direction Enumeration

    • rotation_parameters (list) – Rotation Parameters List

    • comment (str, optional) – Comments

    • params (dict, optional) – Any WS Parameter relevant to the object and its value in form of a dictionary

    • model (RFEM Class, optional) – Model to be edited

# ConcreteSurfaceReinforcements

# ConcreteSurfaceReinforcements(no, name, surfaces, material, location_type, reinforcement_type, reinforcement_type_parameters, cover_offset, reinforcement_direction, reinforcement_direction_parameters, reinforcement_location, reinforcement_acting_region, comment, params, model)

  • Parameters

    • no (int) – Concrete Surface Reinforcement Tag

    • name (str) – User Defined Name

    • surfaces (str) – Assigned Surfaces

    • material (str) – Reinforcement Material

    • location_type (enum) – Surface Reinforcement Location Type Enumeration

    • reinforcement_type (enum) – Surface Reinforcement Type Enumeration

    • reinforcement_type_parameters (list) – Reinforcement Type Parameters List

      • for reinforcement_type = SurfaceReinforcementType.REINFORCEMENT_TYPE_REBARS:
        reinforcement_type_parameters = [rebar_diameter, rebar_spacing, additional_transverse_reinforcement_enabled]
      • if additional_transverse_reinforcement_enabled == True:
        reinforcement_type_parameters = [rebar_diameter, rebar_spacing, additional_transverse_reinforcement_enabled, additional_rebar_diameter, additional_rebar_spacing]
      • for reinforcement_type = SurfaceReinforcementType.REINFORCEMENT_TYPE_STIRRUPS:
        reinforcement_type_parameters = [stirrup_diameter, stirrup_spacing]
      • for reinforcement_type = SurfaceReinforcementType.REINFORCEMENT_TYPE_MESH:
        reinforcement_type_parameters = [mesh_product_range, mesh_shape, mesh_name]

    • cover_offset (list) – Cover Offset Parameters List

      cover_offset = [alignment_top_enabled, alignment_bottom_enabled, additional_offset_to_concrete_cover_top, additional_offset_to_concrete_cover_bottom]

    • reinforcement_direction (enum) – Surface Reinforcement Direction Enumeration

    • reinforcement_direction_parameters (list) – Reinforcement Direction Parameters

    • reinforcement_location (list) – Reinforcement Location Parameters

    • reinforcement_acting_region (list) – Reinforcement Acting Region Parameters

    • comment (str, optional) – Comments

    • params (dict, optional) – Any WS Parameter relevant to the object and its value in form of a dictionary

    • model (RFEM Class, optional) – Model to be edited

← Types for Lines →